By Terry Schutz
Terry Schutz is a freelance writer specializing in home renovations, DIY advice, and construction topics. Terry has worked in the construction industry for over 30 years—acquiring knowledge as an installer, manager, salesperson, and business owner.
Learn more about Homedit's Editorial Process
| Published on
of 1
Making basem*nt warm
15 Tips For Making a Basem*nt Warm
A warm cozy basem*nt family room or bedroom makes for a more comfortable and livable home. Unfortunately, many basem*nts remain cool and damp after finishing. They require supplemental heat to be truly comfy.
Why Basem*nts Are Cold
Many things conspire to keep basem*nts cool.
- Location. The basem*nt is at the bottom of the house and warm air rises.
- Heating. Many home heating systems are inadequate to fully heat the basem*nt.
- Poor Insulation. Many basem*nts lack sufficient insulation to retain heat.
- Air Infiltration. Poorly fitting windows. Gaps and cracks.
- Humidity. High humidity makes basem*nt air feel cold, drafty, and damp.
15 Ways to Warm Up a Basem*nt
Thermal imaging cameras can be purchased for less than $100.00. They show cold spots in the basem*nt that require attention.
Replace Drafty Windows
Basem*nt windows are often small and single-glazed in rotting wood frames. Fixing drafty windows, replacing them, or covering them with plastic, tight curtains, or even plywood reduces heat loss and moisture infiltration.
Seal Gaps
Use spray foam to seal gaps around windows, doors, and wall penetrations. Plumbing, electrical, and heating penetrations to the upper floors should also be sealed to keep warm air in the basem*nt.
Duct and Pipe Insulation
Dryer vents, cold air intakes, bathroom vents, and gas lines that penetrate the exterior wall conduct cold air into the basem*nt. Not only should the holes be sealed but insulating ductwork and the pipes prevent cold and condensation.
Insulate Rim Joists
Insulate rim joists with DIY spray foam or rigid foam board insulation. Warm air rises to the basem*nt ceiling and uninsulated rim joists allow it to escape outside.
Install a Ceiling Fan
A ceiling fan installed in the basem*nt and operated in reverse circulates warm air back down towards the floor and moves it throughout the room.
Modify the Heating System
Many basem*nt heating system vents and air returns are located in the basem*nt ceilings–preventing much of the warm air from efficiently reaching the floor and seating areas. Extending ducts to the floor keeps basem*nts warmer.
Purchase a Dehumidifier
The ideal basem*nt humidity level is 30% in winter. Higher humidity makes basem*nts feel cool and clammy. A good portable dehumidifier removes many pints of moisture per day and can be adjusted to maintain a constant humidity level. Arrange to drain it directly into the floor drain to eliminate the need to empty the container.
Add Electric Baseboard Heaters
Locate portable electric baseboard heaters in bedrooms or family rooms. They are virtually silent and provide heat at floor level where basem*nts are usually coldest.
Use Portable Space Heaters
Space heaters are ideal for smaller areas like bedrooms. They are quiet and easy to move where needed. Also less expensive than baseboard heaters. Most of them are quiet and can be aimed exactly where wanted–like a bed or reading area.
Put Down Area Rugs
Area rugs do not add heat but prevent cold from coming up through floors. They are especially effective when combined with thick underlayment on concrete floors. Taping 6 mil poly on the floor first prevents moisture from wicking into the carpet. (Moist carpets will grow mold.)
Radiant Wall Heaters
Radiant wall heaters are not portable. They are screwed onto the wall and plugged into a 120-volt outlet. An easy DIY installation. Radiant heaters provide quick silent warmth and are cool to the touch.
Electrical Heat Mats
Electrical heat mats are designed to be placed under carpet, tile, stone, and luxury vinyl plank to warm smaller areas like bathrooms. They are thermostatically controlled and are plugged into a regular outlet or hard-wired.
Add Insulation
Insulating basem*nt walls, floors, and ceilings is a major project. Doing it all in an unfinished basem*nt makes sense. Tearing out a finished basem*nt to install better insulation is a costly project.
Install a Fireplace Or Wood-Burning Stove
Gas or electric fireplaces or wood-burning stoves provide great heat to open-concept basem*nts where the heat can flow throughout the space. They are expensive and usually require professional installation and inspections.
Install Radiant In-Floor Heating
Basem*nt floor heating is the best way to keep a basem*nt warm. It provides consistent heat from the floor up and is most often installed during construction with the concrete floor poured over it. Floor heating can also be added over existing concrete.
